https://forums.autodesk.com/t5/fusion-design-validate-document/how-can-i-implement-this-shape/m-p/13251704#M7866 <P><span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="화면 캡처 2025-01-09 190555.png" style="width: 818px;"><img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1452839i97B2D1F35D026D67/image-size/large?v=v2&amp;px=999" role="button" title="화면 캡처 2025-01-09 190555.png" alt="화면 캡처 2025-01-09 190555.png" /></span></P><P>&nbsp;</P><P>I want to place the torus on the curved surface of the column at regular intervals along the wall so that the diameter gradually decreases (the cross section is maintained) as it goes down. To implement the shape, I thought about drawing a path in the sketch stage and placing a circle on it, listing circles along the curved surface using a path pattern, and then revolving to implement the shape, but I confirmed that the sketch function does not have a path pattern. When I used the path pattern after I finished sketching, the torus of the same size was arranged along the path as shown in the picture and was only biased to one side. Which method can I use?</P> Thu, 09 Jan 2025 11:07:09 GMT hjwaaen 2025-01-09T11:07:09Z https://forums.autodesk.com/t5/fusion-design-validate-document/how-can-i-implement-this-shape/m-p/13251704#M7866 <P><span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="화면 캡처 2025-01-09 190555.png" style="width: 818px;"><img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1452839i97B2D1F35D026D67/image-size/large?v=v2&amp;px=999" role="button" title="화면 캡처 2025-01-09 190555.png" alt="화면 캡처 2025-01-09 190555.png" /></span></P><P>&nbsp;</P><P>I want to place the torus on the curved surface of the column at regular intervals along the wall so that the diameter gradually decreases (the cross section is maintained) as it goes down. To implement the shape, I thought about drawing a path in the sketch stage and placing a circle on it, listing circles along the curved surface using a path pattern, and then revolving to implement the shape, but I confirmed that the sketch function does not have a path pattern. When I used the path pattern after I finished sketching, the torus of the same size was arranged along the path as shown in the picture and was only biased to one side. Which method can I use?</P> Thu, 09 Jan 2025 11:07:09 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/how-can-i-implement-this-shape/m-p/13251704#M7866 hjwaaen 2025-01-09T11:07:09Z https://forums.autodesk.com/t5/fusion-design-validate-document/how-can-i-implement-this-shape/m-p/13251799#M7867 <P>Unfortunately, there is no automatic way to do do this.</P> <P>Attached is a non-sketch based approach.</P> <P>&nbsp;</P> <P><span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="TrippyLighting_0-1736424193608.png" style="width: 600px;"><img src="https://forums.autodesk.com/t5/image/serverpage/image-id/1452859i3D71930581661C8B/image-size/medium?v=v2&amp;px=400" role="button" title="TrippyLighting_0-1736424193608.png" alt="TrippyLighting_0-1736424193608.png" /></span></P> <P>&nbsp;</P> <P>&nbsp;</P> <P>&nbsp;</P> Thu, 09 Jan 2025 12:03:45 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/how-can-i-implement-this-shape/m-p/13251799#M7867 TrippyLighting 2025-01-09T12:03:45Z