topic Re: When I create drawing from design, it makes always assembly drawing + 1 sheet for each component. in Fusion Design, Validate & Document Forum

When I create drawing from design, it makes always assembly drawing + 1 sheet for each component.

martin.konarsky — Fri, 06 Aug 2021 09:20:42 GMT

This is a big problem when I am working with big assemblies. It starts to create tents, or hundreds of sheets and never finish. How to set up a FUSION, that it will create only 1 sheet. I can add more sheets manually, if I want.

thank a lot

Re: When I create drawing from design, it makes always assembly drawing + 1 sheet for each component.

ClintBrown3D — Fri, 06 Aug 2021 09:29:59 GMT

Hi @martin.konarsky

Looks like you are using a smart template, these are designed to do exactly that, place views for each component in the assembly.

If you open up your template file and delete the view placeholders, then save it, you will be able to create a drawing of the top level assembly, without any of the additional sheets.

Here's a bit more info on smart templates: https://clintbrown.co.uk/2021/04/06/quick-tip-smart-templates/

Hope that this helps.

Re: When I create drawing from design, it makes always assembly drawing + 1 sheet for each component.

martin.konarsky — Mon, 09 Aug 2021 09:40:17 GMT

Thanks a lot for your answer.

Unfortunately it did not help me. Neither the video for attached link.

He shows the way how to create such template, which I know. I would like to know how to switch off smart templates.

When I just deleted the placeholders nothing changed.

Any suggestions?

Re: When I create drawing from design, it makes always assembly drawing + 1 sheet for each component.

ClintBrown3D — Mon, 09 Aug 2021 10:06:52 GMT

Hi Martin

Make sure that you have deleted the references too. There are probably one or more references in the browser of your template file.

Re: When I create drawing from design, it makes always assembly drawing + 1 sheet for each component.

g-andresen — Mon, 09 Aug 2021 10:29:56 GMT

Hi,

simply select "existing sheet"

Screencast

günther

Re: When I create drawing from design, it makes always assembly drawing + 1 sheet for each component.

martin.konarsky — Mon, 09 Aug 2021 11:20:13 GMT

Thanks a lot, finally works.