topic Lofting in Fusion Design, Validate & Document Forum

Lofting

charlescooke58 — Thu, 12 Aug 2021 02:53:09 GMT

What is the best way to loft out this wing tip?

Re: Lofting

davebYYPCU — Thu, 12 Aug 2021 03:14:30 GMT

Solid front portion,

Surface loft top and bottom rear portion,

is the starting options.

More important is what you tried and does not work?

Re: Lofting

charlescooke58 — Thu, 12 Aug 2021 03:38:21 GMT

I dont understand what you are saying?

Re: Lofting

davebYYPCU — Thu, 12 Aug 2021 06:12:28 GMT

Then I need the sample file.

Re: Lofting

charlescooke58 — Thu, 12 Aug 2021 06:51:15 GMT

How do I do a sample file?

Re: Lofting

davebYYPCU — Thu, 12 Aug 2021 07:04:50 GMT

Export the File, (saves to hard drive)

Edit a post in the forum, and add the file as an attachment, in a section below the message window.

Otherwise Share a link, and copy the link into a message. Tick the section to allow the download.

Might help....

Re: Lofting

charlescooke58 — Thu, 12 Aug 2021 07:23:13 GMT

Here it is I hope....

Re: Lofting

charlescooke58 — Thu, 12 Aug 2021 07:24:39 GMT

Cessna210 v45.f3d (file://DESKTOP-18I657K/Users/charl/OneDrive/Documents/Cessna%20aircraft/Cessna210%20v45.f3d)

Re: Lofting

davebYYPCU — Thu, 12 Aug 2021 07:44:20 GMT

Nope,

That file has to be "Ättached" to a message, has to be this way if you have Personal Licence,

and the Forum has broken the normal way to do this.

Or any other licence,

Save the file,

Got to the File Menu, and select Share

its a menu then select Public Link,

a White page with blue tick boxes, tick the top two boxes, and press Copy (the link reference),

come to a message and Paste that link.

Might help....

Re: Lofting

charlescooke58 — Thu, 12 Aug 2021 08:27:50 GMT

https://a360.co/3ACGyPs

Re: Lofting

g-andresen — Thu, 12 Aug 2021 08:35:01 GMT

Hi,

1.the file can not be downloaded.
2.try this way

günther

Re: Lofting

charlescooke58 — Thu, 12 Aug 2021 08:42:55 GMT

https://a360.co/3ACGyPs

Re: Lofting

charlescooke58 — Thu, 12 Aug 2021 08:47:26 GMT

https://1drv.ms/u/s!Ap_YU0m2PFIjjiN_-nyvaEiJZBce?e=cmiGjD

Re: Lofting

davebYYPCU — Thu, 12 Aug 2021 09:42:46 GMT

Got it, eventually,

Your geometry was not accurate enough, had to add more work for it to happen,

solid loft, for the front section,

then fixed the trailing edge profile to attach to the wing trailing edge,

Surface Loft the top and then bottom rear section, had to break the Sketch 89 spline at the hoop.

Sketch 89 makes a crease in the tip that is not attractive,

But it works as I described.....

Might help....

Re: Lofting

davebYYPCU — Thu, 12 Aug 2021 10:05:16 GMT

But when the TE and Sketch 89 are used for rails, much better.

Might help....

Re: Lofting

charlescooke58 — Thu, 12 Aug 2021 10:37:44 GMT

Fantastic thanks for this so I am going to redraw it to achieve the result.