topic Re: partial chamfer on inside corner in Fusion Design, Validate & Document Forum

partial chamfer on inside corner

Anonymous — Wed, 25 Aug 2021 03:28:28 GMT

I have a shelled box. I can place a chamfer on an inside corner which uses the entire length of the corner. I want the chamfer to only extend from the open face 10 mm down the corner. How to do this please?

Re: partial chamfer on inside corner

davebYYPCU — Wed, 25 Aug 2021 04:54:38 GMT

Like this?

Step up the timeline - add your dimensions

Re: partial chamfer on inside corner

Anonymous — Wed, 25 Aug 2021 05:02:04 GMT

No. I want a chamfer across the two side faces, starting a few mm down from the open face and extending down the side faces intersection for x mm. There is a lid covering the open face and the "lug" is to take the screw attaching it. All four corners actually.

Re: partial chamfer on inside corner

davebYYPCU — Wed, 25 Aug 2021 05:22:52 GMT

This one? 4 corners were done in both files.

Might help....

Re: partial chamfer on inside corner

Anonymous — Wed, 25 Aug 2021 05:27:57 GMT

Getting closer. I want the chamfer shorter and near the open end of the intersection. Geoff

Re: partial chamfer on inside corner

davebYYPCU — Wed, 25 Aug 2021 05:30:25 GMT

Edit 2nd Extrude.

Might help....

Re: partial chamfer on inside corner

Anonymous — Wed, 25 Aug 2021 05:37:16 GMT

Yes. Exactly. How do I do that?

Re: partial chamfer on inside corner

davebYYPCU — Wed, 25 Aug 2021 05:44:32 GMT

When you can read Timelines, it's

after the Shell, an Extrude > Two Sides > your dimensions (Join)

2 x Mirror for rectangles, or Circular Pattern for squares.

Re: partial chamfer on inside corner

Anonymous — Wed, 25 Aug 2021 05:54:53 GMT

Thanks. I will have a go at educating myself and get back to you after that.

Re: partial chamfer on inside corner

Anonymous — Wed, 25 Aug 2021 07:08:37 GMT

Am I able to download the time line of your solution please?

Re: partial chamfer on inside corner

davebYYPCU — Wed, 25 Aug 2021 07:33:34 GMT

OK.

Re: partial chamfer on inside corner

Anonymous — Wed, 25 Aug 2021 10:04:46 GMT

Thanks Dave. Works a treat.