topic Re: slider Joint on X and Y axis in Fusion Design, Validate & Document Forum

slider Joint on X and Y axis

Anonymous — Tue, 21 Sep 2021 19:25:25 GMT

I'm new on Fusion 360 but now I have a problem I thought i would resolve in 2 minutes.

I have a plate with a pin on and a plate with a slot in in X axis and Y axis. I created a sliding joint from the the pin to X axis and another to the Y axis. When I suppress one of the two joints i can of course move the plate in one direction ..

I searched in the forums but did not find an answer on what I think is something basic. no ?

Thanks

Re: slider Joint on X and Y axis

TheCADWhisperer — Tue, 21 Sep 2021 19:33:30 GMT

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Contact Set might work.

Re: slider Joint on X and Y axis

jhackney1972 — Tue, 21 Sep 2021 21:02:51 GMT

With one slotted component, as your screen capture shows, a combined simultaneous motion along both axis is not possible without, as you already know, suppressing one Slider Joint or the other. Since each slider joint uses a different motion axis one always violates the other so they cannot act together.

Re: slider Joint on X and Y axis

davebYYPCU — Tue, 21 Sep 2021 21:27:18 GMT

Use a Planar Joint,

with the Contact Set (which have known issues)

Might help....

Re: slider Joint on X and Y axis

Anonymous — Wed, 22 Sep 2021 10:40:23 GMT

Thanks for the quick response. I uploaded the file.

Re: slider Joint on X and Y axis

davebYYPCU — Wed, 22 Sep 2021 11:24:21 GMT

Don't know what that file format does.

Might help....