topic Betreff: Sketches not generating 2d faces in Fusion Design, Validate & Document Forum

Sketches not generating 2d faces

noMLKDA — Sat, 25 Sep 2021 05:09:14 GMT

Not sure why the second rectangle doesn't "fill in". This has happened in other places in the project. Since the profiles aren't shaded in(aren't profiles) they can't be used to extrude etc.

Re: Sketches not generating 2d faces

g-andresen — Sat, 25 Sep 2021 08:28:53 GMT

Hi,

Please share the file.

Then you could check if the profile is not closed.

File > export > save as f3d on local drive > attach it to the next post.

günther

Re: Sketches not generating 2d faces

TheCADWhisperer — Sat, 25 Sep 2021 10:04:31 GMT

2D sketch or is it really 3D sketch?

Re: Sketches not generating 2d faces

noMLKDA — Sun, 26 Sep 2021 02:37:48 GMT

That's kinda what I was thinking but I'm not sure why the first rectangle became a profile.

Re: Sketches not generating 2d faces

noMLKDA — Sun, 26 Sep 2021 02:46:47 GMT

There's the file. Sketch 14 is the one this is regarding, however Sketch 2 has the same problem. Thanks for the help.

Betreff: Sketches not generating 2d faces

mango.freund — Sun, 26 Sep 2021 07:00:23 GMT

hello, in sketch 2 "show profile" was switched off. in skestch 14 i removed projected links and the profile was immediately visible. all lines blue!!! not good. greetings mango

Re: Sketches not generating 2d faces

TheCADWhisperer — Sun, 26 Sep 2021 14:10:56 GMT

@noMLKDA wrote:
1. Sketch 14 is the one this is regarding, however
2.Sketch 2 has the same problem. Thanks for the help.

1. Turn Projected to Construction and close the profiles.

2. Turn on Shaded Profiles.

Re: Sketches not generating 2d faces

noMLKDA — Sun, 26 Sep 2021 21:18:25 GMT

Thank you for the help people. I appreciate you taking the time to figure this out.