topic imported dwg title block not showing in fusion 360 drawing in Fusion Design, Validate & Document Forum

imported dwg title block not showing in fusion 360 drawing

sfdesign.sachinforge — Wed, 29 Sep 2021 10:37:02 GMT

Hello Everyone,

I have imported new title block using this( To Save a Block as a Drawing File | AutoCAD 2017 | Autodesk Knowledge Network). It got added but it is not showing on fusion 360. I have attached Auto cad ( dwg ) file and also fusion file.

https://a360.co/3A2AFL3 - Fusion file

Betreff: imported dwg title block not showing in fusion 360 drawing

g-andresen — Wed, 29 Sep 2021 10:52:43 GMT

Hi,

Remove References (X-REF)

INFO - XREF

günther

Re: imported dwg title block not showing in fusion 360 drawing

ClintBrown3D — Wed, 29 Sep 2021 10:56:59 GMT

Hi @sfdesign.sachinforge

Welcome to the forums. The title block needs a little bit of clean up before it can be imported into Fusion 360. As @g-andresen has mentioned, all xrefs need to be removed.

Please have a look at this guide that I wrote, there is also a video: https://clintbrown.co.uk/2021/03/10/quick-tip-creating-reusing-dwg-title-blocks/

I have some additional title block resources here: https://knowledge.autodesk.com/community/collection/title-blocks-8

Re: imported dwg title block not showing in fusion 360 drawing

ClintBrown3D — Wed, 29 Sep 2021 11:16:36 GMT

Hi @sfdesign.sachinforge

I cleaned up the DWG as outlined in my article above. I scaled the template down, as it was possibly drawn up using an inch template in AutoCAD.

Here is the import working, attached is the cleaned up DWG.

Re: imported dwg title block not showing in fusion 360 drawing

sfdesign.sachinforge — Thu, 30 Sep 2021 06:50:55 GMT

Thank you so much! I understood everything clearly 🙂

Re: imported dwg title block not showing in fusion 360 drawing

sfdesign.sachinforge — Thu, 30 Sep 2021 06:53:18 GMT

Hello @ClintBrown3D

Thank you so much for helping! Understood everything clearly.