topic Chamfer in middle of a surface in Fusion Design, Validate & Document Forum

Chamfer in middle of a surface

bdrmachine — Sat, 13 Nov 2021 15:38:04 GMT

I'm trying to model a group of tiles to 3d print. As with a lot of tile designs each tear of tiles is offset half the length of the last tear. How do I cut a .05 inch chamfer on these inside tiles?

Betreff: Chamfer in middle of a surface

g-andresen — Sat, 13 Nov 2021 16:23:45 GMT

Hi,

please share the file

File > Export > save as f3d on local device > attach to next post

günther

Re: Chamfer in middle of a surface

bdrmachine — Sat, 13 Nov 2021 16:46:08 GMT

Thanks

Re: Chamfer in middle of a surface

g-andresen — Sat, 13 Nov 2021 17:20:34 GMT

Hi,

That could be solved like this.
However, this method is simpler, whereby you can select the individual edges instead of the faces.

günther

Re: Chamfer in middle of a surface

bdrmachine — Sat, 13 Nov 2021 18:46:54 GMT

The 1st method work for me. Thanks so much.

Re: Chamfer in middle of a surface

g-andresen — Sat, 13 Nov 2021 19:40:51 GMT

Hi,

That sounds good.

Please mark posts that have led to a solution with a check mark as "Accepted Solution".

That will make it easier for future readers.

günther