topic Betreff: Extrude-cut does not cut through entire solid body in Fusion Design, Validate & Document Forum

Extrude-cut does not cut through entire solid body

Anonymous — Tue, 23 Nov 2021 09:18:10 GMT

I don't understand why this closed sketch only cuts the rounded corners of this solid part?

Betreff: Extrude-cut does not cut through entire solid body

g-andresen — Tue, 23 Nov 2021 09:20:26 GMT

Hi,

Please share the file.

File > export > save as f3d on local drive > attach it to the next post

günther

Betreff: Extrude-cut does not cut through entire solid body

Anonymous — Tue, 23 Nov 2021 10:22:50 GMT

Here is the attached file.

Betreff: Extrude-cut does not cut through entire solid body

TrippyLighting — Tue, 23 Nov 2021 11:03:13 GMT

The reason is that you have 2 sketch profiles. f you want both to cut, you'll have to select both.

Hold the ctrl ky and slect the 2nd one. Then it will cut.

I would recommend you turn off this "feature" in the preferences. It's more a hindrance than it helps.

Betreff: Extrude-cut does not cut through entire solid body

g-andresen — Tue, 23 Nov 2021 11:12:40 GMT

Hi,

selecting several profiles without ctrl

günther

Betreff: Extrude-cut does not cut through entire solid body

Anonymous — Tue, 23 Nov 2021 20:42:32 GMT

Thanks TrippyLighting. I tried turning-off that feature, but I still needed to select both contours of the sketch to get it to cut through properly. Still can't quite get my head around what it's doing. I come from a SolidWorks and Catia background, and this seems strange to me.

Betreff: Extrude-cut does not cut through entire solid body

Anonymous — Tue, 23 Nov 2021 20:45:41 GMT

Thanks Guenther. Great video explanation btw! It worked just as you showed. I'm totally new to the Fusion 360 software and community. Great to know that there is friendly support out there. 🙂

Betreff: Extrude-cut does not cut through entire solid body

TrippyLighting — Tue, 23 Nov 2021 20:49:11 GMT

@Anonymous wrote:

Thanks TrippyLighting. I tried turning-off that feature, but I still needed to select both contours of the sketch to get it to cut through properly. Still can't quite get my head around what it's doing. I come from a SolidWorks and Catia background, and this seems strange to me.

In Fusion 360 you can use a single sketch to create several sketch profiles. Those can then be used to create separate 3D geometries. Comes inn very handy!

But it also simply means that sometimes you'll have to select more than one sketch profile to create one contiguous feature such as this cut.