topic Mesh, T-Spline, surface bodies warning when converting to drawing. in Fusion Design, Validate & Document Forum

Mesh, T-Spline, surface bodies warning when converting to drawing.

kunwar.khanna2021 — Sun, 02 Jan 2022 12:02:43 GMT

Hi so I got this vehicle model that I need to convert to 2D drawing but it's showing that "Mesh, T-splines and surface bodies will not be a part of the drawing. And the final drawing I get is missing some components so I really can't convert it to a solid body. It would be great if someone could correct it cuz I had no luck in it. I have attached the f3d file and some screenshots below.

Thanks

Re: Mesh, T-Spline, surface bodies warning when converting to drawing.

TrippyLighting — Sun, 02 Jan 2022 12:25:25 GMT

You just need to thicken all those surface bodies that you want to show up on the drawing.

Your T-spline modeling is a little rough. Modeling mostly (80%) in Box-view mode, is going to help that.

Betreff: Mesh, T-Spline, surface bodies warning when converting to drawing.

mango.freund — Sun, 02 Jan 2022 20:19:22 GMT

Re: Mesh, T-Spline, surface bodies warning when converting to drawing.

kunwar.khanna2021 — Mon, 03 Jan 2022 11:51:31 GMT

Thanks for the reply but as a beginner in fusion I don't know how to correct them, I tried to thicken them as you said but it won't let me.

Betreff: Mesh, T-Spline, surface bodies warning when converting to drawing.

kunwar.khanna2021 — Mon, 03 Jan 2022 11:52:20 GMT

Thanks a lot. This would do the trick. However could you explain how you corrected it ?

Betreff: Mesh, T-Spline, surface bodies warning when converting to drawing.

mango.freund — Mon, 03 Jan 2022 12:01:54 GMT

if a part could not be thickened, then i first detached it from the composite. then all areas are selected and thickened in smaller groups. often it is not possible to thicken because the neighboring part could not go along with the composite. so now you can logically recombine the volume bodies to have one body. greetings mango

Betreff: Mesh, T-Spline, surface bodies warning when converting to drawing.

mango.freund — Mon, 03 Jan 2022 12:09:48 GMT

i forgot: maybe some bodies are made twice, see rear spoiler. turn off or remove.

Betreff: Mesh, T-Spline, surface bodies warning when converting to drawing.

kunwar.khanna2021 — Tue, 04 Jan 2022 03:39:42 GMT

Ohh got it got it. Thanks for that. Also yeah rear spoiler is made twice