topic Re: Flatten Balsa or Plywood Fuselage parts of a model airplane in Fusion Design, Validate & Document Forum

Flatten Balsa or Plywood Fuselage parts of a model airplane

r.guzardo — Sat, 08 Jan 2022 05:03:39 GMT

I know this has been asked in a myriad of different ways by other forum users and on all the RC forums.

Currently, I'm attempting to accomplish this flatten function using meshmixer, but that seems to be going away. AutoDesk states they are incorporating some of the functionality of meshmixer in the Fusion360. Will the "unfold" or flatten feature be in the updates?

I have come across discussions of solutions, in Fusion360, claiming to use the sheet metal function. I have been able to flatten a spline shape by creating a flange on the spline, but have had no success once the sheet metal part is edited for its final shape.

The material is usually lite-ply or balsa.

On a positive note, I've achieved a certain level of success with creating model in fusion!

(The windscreen modeling is for another topic, so don't judge! It is also to be cut from a flat sheet.)

Thanks

Joe

My success!What I need Flattening

Betreff: Flatten Balsa or Plywood Fuselage parts of a model airplane

mango.freund — Sat, 08 Jan 2022 05:58:34 GMT

hello, your winch protection part has two edges and a radius? that should go with the sheet metal rules. However, you should never construct the substructure with splines or bend it in two planes. there are no sheet metal rules for this. but with arcs and lines a processing is possible. greetings mango

Betreff: Flatten Balsa or Plywood Fuselage parts of a model airplane

TrippyLighting — Sat, 08 Jan 2022 12:30:46 GMT

@mango.freund as long as it creates a developable surface you can use a spline.

Re: Flatten Balsa or Plywood Fuselage parts of a model airplane

jhackney1972 — Sat, 08 Jan 2022 13:52:30 GMT

Please attach your model or at least the component you show that needs to be flattened.

Re: Flatten Balsa or Plywood Fuselage parts of a model airplane

r.guzardo — Sat, 08 Jan 2022 15:46:37 GMT

Hey John,

Here is just the Fuselage Top

https://a360.co/3n9T7h8

Re: Flatten Balsa or Plywood Fuselage parts of a model airplane

jhackney1972 — Sat, 08 Jan 2022 16:38:01 GMT

My method is to actually replicate your component into a sheet metal component and then flatten it. The process is outlined in the Screencast. In the attached model, I have turned off the visibility of your component and changed the opacity also. Let me know if you have any questions.

Re: Flatten Balsa or Plywood Fuselage parts of a model airplane

TrippyLighting — Sat, 08 Jan 2022 17:20:12 GMT

The reason John is thickening a surface instead of directly converting your part into a sheet metal component is that the way you designed the piece, would not create cut walls perpendicular to the top and bottom surfaces.

Re: Flatten Balsa or Plywood Fuselage parts of a model airplane

r.guzardo — Sat, 08 Jan 2022 19:02:09 GMT

Yes, you are correct, they do need to be perpendicular to the top and bottom surfaces. I tried several ways to create tabs and slots to achieve this. The method I used here is about the closest and cleanest. Now to try it on the laser and see how it works.

Thanks

Re: Flatten Balsa or Plywood Fuselage parts of a model airplane

r.guzardo — Sat, 08 Jan 2022 19:03:16 GMT

You are the man John!

I am going to work on this technique in the hopes of replicating what you demonstrated.

Thank you very much!!

Re: Flatten Balsa or Plywood Fuselage parts of a model airplane

r.guzardo — Sun, 09 Jan 2022 05:20:45 GMT

Do you have a recommended method for creating the tabs and slots so they are exactly perpendicular, in order to avoid the surface steps?

Betreff: Flatten Balsa or Plywood Fuselage parts of a model airplane

NoonJA — Fri, 15 Jul 2022 20:27:51 GMT

This is the fuselage side I have been trying to flatten and may have to resort to doing it by hand

Betreff: Flatten Balsa or Plywood Fuselage parts of a model airplane

r.guzardo — Fri, 15 Jul 2022 23:17:32 GMT

That looks like it has some compound curves. I had used meshmixer for those types of surfaces. Now, all the mesh tools are in fusion. I’ve yet to experiment with them.

Betreff: Flatten Balsa or Plywood Fuselage parts of a model airplane

TheCADWhisperer — Sat, 16 Jul 2022 21:34:59 GMT

One problem - your cut edges are not perpendicular to the faces - so top side and bottom side will be different.

(...or inside/outside depending on what you want to call them.)

>>Unwrap<<

Betreff: Flatten Balsa or Plywood Fuselage parts of a model airplane

NoonJA — Sun, 17 Jul 2022 02:11:35 GMT

Looking like I will be making changes to the fuselage.

thank you

Betreff: Flatten Balsa or Plywood Fuselage parts of a model airplane

TheCADWhisperer — Sun, 17 Jul 2022 11:47:52 GMT

Use Surface modeling techniques.

Thicken if needed/desired.