topic Re: Exporting a DXF from several parts in Fusion Design, Validate & Document Forum

Exporting a DXF from several parts

stephanart — Wed, 19 Jan 2022 12:58:57 GMT

hi!
i am trying to export a dxf with all the different parts i made. when i create a sketch plane and project my bodies onto it, it only captures the outline silhouettes though. Is there a way to capture the smaller extruded details as well?

or is there a better way to do this alltogether?

Re: Exporting a DXF from several parts

barry9UDQ6 — Wed, 19 Jan 2022 14:12:24 GMT

You need to do it manually. When you are in the sketch,-project and then choose the appropriate faces.

Re: Exporting a DXF from several parts

whittakerdw — Wed, 19 Jan 2022 15:40:27 GMT

You must project those lines individually. If you are just clicking the box that entails the etch, then the box alone will be projected. If you click on the individual surfaces or lines of the etching, then that will be projected as well.

Re: Exporting a DXF from several parts

davebYYPCU — Wed, 19 Jan 2022 18:24:41 GMT

With some planning, and if it works for your requirements,

set the Offset sketch plane, a tad under the top level of the carving.

Use project > Intersect - Body, to quick Select all of the body geometry.

Cutting heights will determine whether you need one or more sketches.

Might help....