topic adding joints to parallellogram in Fusion Design, Validate & Document Forum https://forums.autodesk.com/t5/fusion-design-validate-document/adding-joints-to-parallellogram/m-p/10925313#M64830 <P>In the model are the moving parts from a bicycle derailler for the parallel movement, when adding the 4th joint it gives a error message. How can joints be applied to any parallellogram?</P> Thu, 03 Feb 2022 08:02:04 GMT gertjanmeij 2022-02-03T08:02:04Z adding joints to parallellogram https://forums.autodesk.com/t5/fusion-design-validate-document/adding-joints-to-parallellogram/m-p/10925313#M64830 <P>In the model are the moving parts from a bicycle derailler for the parallel movement, when adding the 4th joint it gives a error message. How can joints be applied to any parallellogram?</P> Thu, 03 Feb 2022 08:02:04 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/adding-joints-to-parallellogram/m-p/10925313#M64830 gertjanmeij 2022-02-03T08:02:04Z Betreff: adding joints to parallellogram https://forums.autodesk.com/t5/fusion-design-validate-document/adding-joints-to-parallellogram/m-p/10925802#M64831 <P>limits are not set. BR mango</P> Thu, 03 Feb 2022 12:31:47 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/adding-joints-to-parallellogram/m-p/10925802#M64831 mango.freund 2022-02-03T12:31:47Z Re: adding joints to parallellogram https://forums.autodesk.com/t5/fusion-design-validate-document/adding-joints-to-parallellogram/m-p/10925820#M64832 <P>When the 4th joint causes all to fail, check for alignment errors within the parts or Joint selected snap points,&nbsp;</P> <P>or you can cheat and make one a cylindrical Joint.</P> <P>&nbsp;</P> <P>Might help....</P> Thu, 03 Feb 2022 12:45:01 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/adding-joints-to-parallellogram/m-p/10925820#M64832 davebYYPCU 2022-02-03T12:45:01Z Re: adding joints to parallellogram https://forums.autodesk.com/t5/fusion-design-validate-document/adding-joints-to-parallellogram/m-p/10925903#M64833 Thanks... the alignment was difficult to find, but the cylindrical cheat works just fine.<BR />Now it moves with 3 revolving and 1 cylindrical joints.<BR /> Thu, 03 Feb 2022 13:19:41 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/adding-joints-to-parallellogram/m-p/10925903#M64833 gertjanmeij 2022-02-03T13:19:41Z