topic Re: Loft function problem in Fusion Design, Validate & Document Forum

Loft function problem

lukasdobis — Sat, 05 Feb 2022 17:09:00 GMT

Hello, I need help connecting the cylinder to the square object. I would like to use the loft function for this, but it throws an error. I am a beginner in 3D modeling just learning with this program could you please give me some advice. Or send me a link to some video tutorial?

Re: Loft function problem

jeff_strater — Sat, 05 Feb 2022 17:14:02 GMT

Please share your model here. It's hard to tell from the image what profiles you are trying to loft between, but from that view, it doesn't look like a reasonable set of profiles. In addition to the model, if you can hand-draw on an image of what your desired outcome is like, that would also help. Thanks

Re: Loft function problem

lukasdobis — Sat, 05 Feb 2022 18:43:49 GMT

It's simple that the cylinder represents the tube at the end must be bit hollow and I need a watertight connection between that rectangle and that cylinder.

Re: Loft function problem

TrippyLighting — Sat, 05 Feb 2022 23:29:21 GMT

@lukasdobis wrote:

It's simple ...

In that case, please create a paper-pencil sketch and show us what you imagine for the resulting object to look like.

Re: Loft function problem

davebYYPCU — Sun, 06 Feb 2022 01:37:06 GMT

Your circle sketch does not match the canvass.

We would need more pictures from sides and front back.

Might help....

Re: Loft function problem

lukasdobis — Sun, 06 Feb 2022 20:58:15 GMT

I had to remodel it all over again. It's about dust extration. I want it for my use to my table saw because it occurs to me that the diameter of 60mm is very small and I want to connect a pipe with a size of 100mm

I worked it to the point that it looks quite ok. The problem is that I don't know how to make a suction hole. I marked it with yellow.

I uploaded the images and the file to google drive because I can only upload 3 files here.

https://drive.google.com/file/d/17BbuI0oAZZpKdqRSHirrZ8ViKAO3V8N7/view?usp=sharing, https://drive.google.com/file/d/1R64D1THwk-O5MXyUhyVgGdnzRxjJ0qEN/view?usp=sharing, https://drive.google.com/file/d/1a9hId_TW4QNdr8SsSC8xScxHlQbRgfxo/view?usp=sharing, https://drive.google.com/file/d/1sIwlaSWx2d7JLWViZtuqn1itRgd4bGkb/view?usp=sharing

Re: Loft function problem

g-andresen — Sun, 06 Feb 2022 21:13:58 GMT

Hi,

1. for pictures please use the insert option in the answer form (camera symbol)

2. Is that your goal

günther

Re: Loft function problem

lukasdobis — Sun, 06 Feb 2022 21:25:47 GMT

OK, I'll do it next time. No, that's not it. The picture you sent shows the second port on the table.

I'm trying to model the one in the table saw. Dimensionally, etc., it suits me, there is no need to solve it. The last problem that I can see in the picture I uploaded above is that I had to model it from 2 body.

One body 3 is a 100mm hose connection hole.

Simply put, I need to somehow make a hole in the second body1 to represent body3. So I need to delete what is painted yellow in the picture. There will be a hole I need.

Re: Loft function problem

TheCADWhisperer — Mon, 07 Feb 2022 14:18:31 GMT

First thing I notice is that your Sketch1 is missing a bunch of dimensions?

Then I notice that none of your sketches are fully defined??

Is the Attached what you are after?

Re: Loft function problem

lukasdobis — Mon, 07 Feb 2022 14:43:09 GMT

First of all, I would like to thank you. Exactly what you did I needed. But I would like to ask you to explain how you did it

I did it through canvas based on the picture.

So, if I understand correctly, I should anchor the dimensions in the sketch. Here I have a question of how you would anchor the dimensions of the roundings. The problem is that I did it through 3 point arc.

How did you manage to delete the face on object.