topic Re: Struggling to draw a 3d shape with curved egdes in Fusion Design, Validate & Document Forum

Struggling to draw a 3d shape with curved egdes

salesSS33M — Mon, 12 May 2025 11:20:06 GMT

Hello,

I am trying to draw a 3d sweet shape, but am really struggling.

Everything I do, comes out with square edges.

I have attached a fd3 file and a picture if anyone can help me it would be great. I have been trying this for hours now. I'm sure it is easy if you know how.

Really appreciate any advise

Kind Regards

Gemma

Betreff: Struggling to draw a 3d shape with curved egdes

wersy — Mon, 12 May 2025 13:14:25 GMT

Quick and simple.

Re: Struggling to draw a 3d shape with curved egdes

johnsonshiue — Mon, 12 May 2025 16:16:20 GMT

Hi!

I believe this is another case that Non-Uniform Scale can help. Basically, you need to revolve the the sketch around the center axis. Then use Non-Uniform Scale command to scale the body upward in Z direction.

Many thanks!

Re: Struggling to draw a 3d shape with curved egdes

TheCADWhisperer — Mon, 12 May 2025 16:35:32 GMT

@salesSS33M

See Attached.

Re: Struggling to draw a 3d shape with curved egdes

laughingcreek — Mon, 12 May 2025 17:11:08 GMT

and one more idea-

Betreff: Struggling to draw a 3d shape with curved egdes

salesSS33M — Mon, 02 Jun 2025 12:52:55 GMT

Thank you very much for your help

Betreff: Struggling to draw a 3d shape with curved egdes

salesSS33M — Mon, 02 Jun 2025 12:54:59 GMT

Thank you for your help

Re: Struggling to draw a 3d shape with curved egdes

salesSS33M — Mon, 02 Jun 2025 12:56:21 GMT

Thank you to everyone for your help. This has been highly appreciated. I am now struggling with another problem on the same subject. But I will post this as a new issue. Your help is always really helpful on this forum. Thank you.