topic Handrail bracket loft build in Fusion Design, Validate & Document Forum

Handrail bracket loft build

bdf6340 — Fri, 11 Mar 2022 18:42:05 GMT

I am attempting to create a design for manufacturing a handrail bracket. I have attempted it several times and now have modified the design and need to finalize to design. Does anyone have any suggestions on mash modeling for the detailed surface alterations?

Re: Handrail bracket loft build

jeff_strater — Fri, 11 Mar 2022 19:13:24 GMT

@bdf6340 - can you provide some more information? Is this a Loft question? Can you provide the model that you are working on, and some more information about the problems you are currently having with Fusion?

Re: Handrail bracket loft build

TheCADWhisperer — Sat, 12 Mar 2022 12:02:50 GMT

@bdf6340 wrote:
I have attempted it several times…

Attach the *.f3d files of your attempts here.

Re: Handrail bracket loft build

bdf6340 — Sat, 12 Mar 2022 22:08:21 GMT

https://a360.co/3i16rkR

This is the loft I can't get to work

Re: Handrail bracket loft build

TrippyLighting — Sun, 13 Mar 2022 00:00:35 GMT

Can you sketch the geometry you are imagining on a piece of paper using a pencil?

You are lofting from a 6-sided to an 8-sided to a circular profile. Add a few fillets here and there.

So if you go from 6 sides to 8, that would result in a The first thing I would recommend is to remove any sketch fillets. Decorative fillets are secondary surfaces/features and should be added later.