topic Re: Setting origin point on irregular shaped projects in Fusion Design, Validate & Document Forum

Setting origin point on irregular shaped projects

KevinHM4VD — Wed, 16 Mar 2022 04:16:29 GMT

I have been working really hard on getting this project to get it drawn in the software but My material shown in yellow and my origin is located at the bottom right and I would want it to be set at the bottom left corner. I have tried to get this done but when I use the align feature the tool path ends up being way off to the left. Do I need to align the origin then redo the tool paths?

Re: Setting origin point on irregular shaped projects

pramod.pk2XX6G — Thu, 17 Mar 2022 09:09:10 GMT

Hi @KevinHM4VD

Thanks for posting. Here first I would like to let you know that, there are two coordinate systems. One is the default one from the design workspace and the other one is your manufacturing Cam Work coordinate system. I Thing you were trying to place the WCS of Cam to the Bottom corner of the Manufacturing model. Refer to the screencast video recording to do so.

Screencast recording link - https://autode.sk/37DhTRQ

Please let me know if that helps.

Thanks,

Pramod