topic Creating a curved sheet metal part in Fusion Design, Validate & Document Forum

Creating a curved sheet metal part

odm357 — Fri, 06 May 2022 21:30:37 GMT

I'm trying to create a curved sheet metal part. I will be rolled manually, but I need to know the unfolded shape to have it cut.

I'm starting with the sketches, one above the other. Each sketch has a line in U shape that is NOT aligned to the other one. I then used a surface loft tool to create the surface between both sketches, then I created a sheet metal part. When I try to flatten it, I get this error:

Can't complete sheet metal operation due to model compute error.

Any help will be appreciated!

Re: Creating a curved sheet metal part

m.sachin.krishna — Sat, 07 May 2022 00:45:45 GMT

Hi,

I have attached a reference file with the outcome you need. Let me know if it helps in any way. You can go through the timeline and see what I have done.

I created a sheet metal component from the Sheet metal tab first and used the flange command to extrude up to a certain distance and I offset a plane. Used this plane to split the body to get what you need. Now the sheet metal component can be made as a flat pattern. You can change the thickness in the sheet metal rules.
Thanks.

Re: Creating a curved sheet metal part

odm357 — Sat, 07 May 2022 14:47:45 GMT

thanks a lot @m.schin.krishna.

It's very close, but it is not touching the second sketch at the top.

I think that is what makes it difficult.

Re: Creating a curved sheet metal part

jhackney1972 — Tue, 10 May 2022 00:17:40 GMT

I think this is what you want. Model is attached.

Re: Creating a curved sheet metal part

jhackney1972 — Tue, 10 May 2022 19:28:46 GMT

Did my post solve your issue? If so not forget to mark the Forum post, that solved your question, by selecting the "Accept Solution" icon. This closes the question, makes the solution available to others with similar questions and acknowledges the solution as helpful. If it did not answer your question please post any further questions you have.

Re: Creating a curved sheet metal part

vanessadebono95 — Tue, 19 Mar 2024 02:29:20 GMT

this help so much, thank you!