topic Betreff: Half Lap on overlapping components in Fusion Design, Validate & Document Forum

Half Lap on overlapping components

john.n.johnson — Sat, 21 May 2022 15:43:41 GMT

Attached is my design for a magazine holder. I used a simple 2 x V shape sketch to get the correct design layout that I wanted and then combined/joined the 2 x V's. I would like to make a half lap joint (without having to try and redraw the sketches) as shown in the attached pic so that I can get accurate cut dimensions of the overlap cut-outs. Any help/guidance is greatly appreciated.

Betreff: Half Lap on overlapping components

g-andresen — Sat, 21 May 2022 16:56:02 GMT

Hi,

1. Hide ^Component 2

2. create a sketch > project the profile of ^Component 1 into

3. Hide V Component 12

4. Copy > paste new V Component 1 > NEW

5. Hide V Component 1

6. create cut outs

7. create a midplane

8. mirror ^Component 2 & NEW

Screencast

günther

Betreff: Half Lap on overlapping components

john.n.johnson — Sun, 22 May 2022 02:43:30 GMT

Thanks very much Guenther. I am new to the project command. This is a great intro/practical example into how it can be used.

Betreff: Half Lap on overlapping components

g-andresen — Sun, 22 May 2022 09:04:30 GMT

Hi,

Here's the complete procedure.

günther