topic Betreff: Parts of body disapear when using revolve tool in Fusion Design, Validate & Document Forum

Parts of body disapear when using revolve tool

oyunjargal.dorjbayar — Tue, 24 May 2022 14:38:32 GMT

Hi everyone,

I'm trying to cut a round shape in all of the square parts of this object using the revolve tool and intersect.

After doing so, the outer circle and a few 'walls' disapear.

I tried to extrude the empty space but fusion keeps crashing, so I don't think that is the solution.

The shape of the round 'wings' are correct so i would like to keep it, but also the cilinder.

Thanks in advance!

g-andresen — Tue, 24 May 2022 14:45:54 GMT

Hi,

1. Please show with pictures of a real object what should be achieved in the end.

2. Please share the file.

File > export > save as f3d on local drive > attach it to the next post

günther

TheCADWhisperer — Tue, 24 May 2022 14:55:22 GMT

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Are your sketches fully defined?

Why is this sketch not in the midplane of the part?

oyunjargal.dorjbayar — Tue, 24 May 2022 14:50:08 GMT

What i would like to have is the same object, only the square 'wings' are rounded (like in screenshot 2).

Thanks!

oyunjargal.dorjbayar — Tue, 24 May 2022 14:55:50 GMT

It cuts the square so i can have a profile to revolve.
I just started using fusion so i'm not sure what is wrong.

TheCADWhisperer — Tue, 24 May 2022 15:05:22 GMT

Do you really really want these to be offset.

Or do you really want these to be centered?

oyunjargal.dorjbayar — Tue, 24 May 2022 15:03:43 GMT

Thank you!! I've been struggling for an hour.
How did you fix it?