topic Betreff: Help filx dxf cutting text! in Fusion Design, Validate & Document Forum

Help filx dxf cutting text!

malinen89 — Sat, 16 Jul 2022 16:18:21 GMT

hi can someone help me fix this dxf file. there are problems with some of the letters 😞

Betreff: Help filx dxf cutting text!

g-andresen — Sat, 16 Jul 2022 16:51:55 GMT

Hi,

What is a mistake from your point of view?

I can't see one.

günther

Betreff: Help filx dxf cutting text!

malinen89 — Sat, 16 Jul 2022 17:30:19 GMT

here you see the problem 😃

Betreff: Help filx dxf cutting text!

g-andresen — Sat, 16 Jul 2022 18:06:06 GMT

Hi,

here´s a f3d file

günther

Betreff: Help filx dxf cutting text!

jhackney1972 — Sat, 16 Jul 2022 18:53:32 GMT

I am with @g-andresen, the DXF opens in both Fusion 360 and AutoCAD 2023 without issue and is complete. What application are you seeing the issue?

Betreff: Help filx dxf cutting text!

malinen89 — Sun, 17 Jul 2022 06:15:16 GMT

Hi thanks for the reply. the problem occurs when i import the dxf file into my nest program. EasyNest pro. You can see in the picture I uploaded earlier. It seems that the lines do not sit together where there is a radius.

Betreff: Help filx dxf cutting text!

g-andresen — Sun, 17 Jul 2022 09:13:22 GMT

Hi,

The problem probably lies in the amount of control points of individual elements.
I have reduced them in V-Carve-Pro.

günther

Betreff: Help filx dxf cutting text!

malinen89 — Sun, 17 Jul 2022 14:56:00 GMT

Okay now it works thanks !. What did you do and why do you have to do that? 😃

Betreff: Help filx dxf cutting text!

g-andresen — Sun, 17 Jul 2022 15:37:15 GMT

Hi,

@malinen89 schrieb:
Okay now it works thanks !. What did you do and why do you have to do that? 😃

The upper curve consists of a large set of (very short) line segments. If these segments do not have a "harmonic" transition, it can cause interference in further processing.
I converted the contours to paths with simultaneous change of resolution.

günther

Betreff: Help filx dxf cutting text!

malinen89 — Sun, 17 Jul 2022 17:27:45 GMT

Okay, I think I understand. I will try to learn this. But if you want you can help me with this hehe 😃

Betreff: Help filx dxf cutting text!

g-andresen — Sun, 17 Jul 2022 19:48:20 GMT

Hi,

Here is a (hopefully) working variant.

günther

Betreff: Help filx dxf cutting text!

malinen89 — Mon, 18 Jul 2022 08:24:14 GMT

The D and S dont work 😞

Betreff: Help filx dxf cutting text!

g-andresen — Mon, 18 Jul 2022 17:58:41 GMT

Hi,

try this version.

I have corrected some (apparently) critical areas by hand because numerous duplicate vectors could not be removed cleanly, which led to chaotic conditions when connecting them.

Screencast

günther