topic Re: Fusion 360 - Orient the vewcube along the setup of the model. in Fusion Design, Validate & Document Forum

Fusion 360 - Orient the vewcube along the setup of the model.

pedro_babo — Wed, 19 Oct 2022 11:27:56 GMT

In order to make it easier to the operator to understand the part is there a way to orient the view cube to the setup created in manufacturing?

we cant align or move the part has it is a version 1 part and it will have updates.

The model is attached it contains a setup

Re: Fusion 360 - Orient the vewcube along the setup of the model.

rushabhthakkar_910 — Wed, 19 Oct 2022 19:28:16 GMT

The file you shared is not opening. Can you share it again..? And shae a link to the file too if possible..

Re: Fusion 360 - Orient the vewcube along the setup of the model.

pedro_babo — Thu, 20 Oct 2022 08:35:40 GMT

Hi @rushabhthakkar_910

re attached the model and a SAT.

later will try to send e-mail.

Re: Fusion 360 - Orient the vewcube along the setup of the model.

rushabhthakkar_910 — Thu, 20 Oct 2022 12:58:44 GMT

It is not possible..

Re: Fusion 360 - Orient the vewcube along the setup of the model.

pedro_babo — Thu, 20 Oct 2022 14:03:28 GMT

Is there a chense that this is to be possible in the future?

Re: Fusion 360 - Orient the vewcube along the setup of the model.

rushabhthakkar_910 — Thu, 20 Oct 2022 14:07:39 GMT

Cannot comment on that.

But you can post your Idea over here..

(https://forums.autodesk.com/?interaction_style=idea)

Re: Fusion 360 - Orient the vewcube along the setup of the model.

aimeehA6N32 — Thu, 20 Oct 2022 14:30:12 GMT

Maybe I'm misreading or oversimplifying, but can't you orient the model onscreen to what would be the Front (or Top) for the operator and then use the pulldown to the right of the ViewCube to reset that view to Front (or Top.)

Re: Fusion 360 - Orient the vewcube along the setup of the model.

rushabhthakkar_910 — Thu, 20 Oct 2022 14:36:20 GMT

Changing the Current view to Top, Front, etc. Won't help.

Because the setup is not aligned to any of the views. It is at an angle.

Re: Fusion 360 - Orient the vewcube along the setup of the model.

aimeehA6N32 — Thu, 20 Oct 2022 14:40:48 GMT

Guess I'm misunderstanding then. How do you want your operator to define/see it?

I can take the part in the view you provided and make that the front.

Re: Fusion 360 - Orient the vewcube along the setup of the model.

rushabhthakkar_910 — Thu, 20 Oct 2022 14:42:51 GMT

Click on the setup and than arrange the view cube to Top, Front, etc.

You'll see a slight angle in the Model's Placement.

Re: Fusion 360 - Orient the vewcube along the setup of the model.

pedro_babo — Thu, 20 Oct 2022 15:14:10 GMT

I wold like the cube to has the picture.

Re: Fusion 360 - Orient the vewcube along the setup of the model.

rushabhthakkar_910 — Thu, 20 Oct 2022 15:44:09 GMT

Re: Fusion 360 - Orient the vewcube along the setup of the model.

pedro_babo — Fri, 21 Oct 2022 13:47:16 GMT

Hi I’ve found a way to do this but you need to work around.

Please see the video

Re: Fusion 360 - Orient the vewcube along the setup of the model.

rushabhthakkar_910 — Fri, 21 Oct 2022 13:49:09 GMT

Video is not attached..

Re: Fusion 360 - Orient the vewcube along the setup of the model.

pedro_babo — Mon, 24 Oct 2022 08:44:36 GMT

the video was on screan cast option.

a copy

https://autode.sk/3TJpFvZ