topic Re: Pipe command in solid workspace in Fusion Design, Validate & Document Forum

Pipe command in solid workspace

hejWR6K4 — Thu, 10 Nov 2022 19:41:42 GMT

Hi.

I'm getting some really strange results.

I'm trying to make panel lines on a model airplane with the pipe tool.

No problems on the fuselage, but on the wings there is no connection with the body when I try a cut command.

On the image I made the "new body" command and the pipe is way off. It should be on the line with the red marking.

Any suggestions?

Thank you

Krister

Re: Pipe command in solid workspace

TrippyLighting — Thu, 10 Nov 2022 20:57:11 GMT

We need to see the model with the full timeline. Export it as .f3d file and attach it post a please.

Re: Pipe command in solid workspace

hejWR6K4 — Fri, 11 Nov 2022 01:07:08 GMT

When I turned off parametric modeling and do direct modeling it's working just fine. Strange...

Re: Pipe command in solid workspace

hejWR6K4 — Fri, 11 Nov 2022 01:07:35 GMT

Hi,

For some reason I can't export as F3D file.

Re: Pipe command in solid workspace

laughingcreek — Fri, 11 Nov 2022 01:58:42 GMT

if you have linked components you can only export .f3z files. you can attach that if you want (though most on the forum prefer if you break the links so you can export as .f3d. it's way less hassle on this end)