topic Re: Help with Sketching a drumstick Model in Fusion Design, Validate & Document Forum

Help with Sketching a drumstick Model

thedoncutta — Fri, 11 Nov 2022 02:32:52 GMT

Hello, can some one post a video modeling out the specs on this drumstick. I’m new to fusion and I’m working on this project with my percussion students. Thanks

Drumstick Specs:

Length: 17.1 inches

Diameter: .72 inches

Shaft: 12 inches

Taper: 4.25 inches

Neck at Bead: .39 inches

Bead length: .85 inches

Bead Diameter: .62 inches

Bead Shape: Taj Mahal

Re: Help with Sketching a drumstick Model

davebYYPCU — Fri, 11 Nov 2022 03:02:20 GMT

Draw the outline with your dimensions, change centre line to Centre line type for diameter dimensions. Edit or add the appropriate spline for the tip.

Might help......

Re: Help designing drumsticks for percussion class

thedoncutta — Fri, 11 Nov 2022 03:07:26 GMT

Re: Help with Sketching a drumstick Model

thedoncutta — Fri, 11 Nov 2022 03:19:02 GMT

Thanks, looks easy I need crash course.

Re: Help with Sketching a drumstick Model

laughingcreek — Fri, 11 Nov 2022 15:46:47 GMT

start with a hand (gasp) sketch and label it with the dimensions from your spec. post a pic of that here.

Re: Help with Sketching a drumstick Model

davebYYPCU — Fri, 11 Nov 2022 20:09:44 GMT

Sketch was done before the pics, I missed the bead diameter if it was not an edit,

@thedoncutta use a 3 point spline now to dimension the bead diameter.

Might help....