topic Issue with Sketch. in Fusion Design, Validate & Document Forum

Issue with Sketch.

andrew_bryan1 — Sun, 23 Feb 2025 05:51:53 GMT

I am new to Fusion and I learn by doing. I am having a problem with this sketch and I have a hunch it has something to do with constraints. I have been at it for hours and even made a new sketch and it has the same issue. I have been using Chat GPT to guide me and it was all working great up until now. Please help!

Re: Issue with Sketch.

andrew_bryan1 — Sun, 23 Feb 2025 05:50:44 GMT

Here are the files if needed

Re: Issue with Sketch.

davebYYPCU — Sun, 23 Feb 2025 06:52:50 GMT

I presume you need the “profile”.

In the edit sketch pallet, tick to turn on Show Profile.

or, while in edit sketch, window select all articles, right click, and Select, Move to Sketch Plane.

Might help….

Re: Issue with Sketch.

Drewpan — Sun, 23 Feb 2025 08:38:34 GMT

Hi,

I would strongly recommend that you do the embedded tutorials in the Fusion Documentation and also some of the

Self-Paced Learning to help you to learn fusion faster and better. They can be found here:

It is also much easier for the forum to help you if you attach your file AND a screenshot of what you want to achieve

and what the problem is. You can create a file to export like this:

Time spent on the tutorials and self paced learning will not be wasted. Also check out the three RULES that are pinned

to the forum for further guidance.

If ChatGPT was actually any good at teaching instead of regurgitating you might have learned something. Time spent

reading the documentation and doing the embedded tutorials is NEVER wasted.

Cheers

Andrew

Re: Issue with Sketch.

jhackney1972 — Sun, 23 Feb 2025 14:00:49 GMT

You have a 3D Sketch so I created a Surface body from it. You can use the Thicken command to make it into a solid body but I do not know what you want to do with it after that. I have attached the file with the surface so you can play with it from here.