topic Re: Emboss text in Fusion in Fusion Design, Validate & Document Forum

Emboss text in Fusion

owrwaytodoit — Mon, 24 Feb 2025 00:42:23 GMT

I am using Fusion 360, and I want to emboss text on a cylinder. I searched on the website, followed the requirements, but it still did not work, what should I do?

Re: Emboss text in Fusion

jhackney1972 — Mon, 24 Feb 2025 00:54:59 GMT

Take a look at the video, it will explain the process and what I think you are doing wrong.

If this answers your question, please select the "Accept Solution" icon on my post. If you have further questions, please ask.

(view in My Videos)

Re: Emboss text in Fusion

owrwaytodoit — Mon, 24 Feb 2025 01:29:22 GMT

Hi there, I followed your lines but it still doesn't work

(view in My Videos)

Can you help me find what I did wrong? Thank you so much!

Re: Emboss text in Fusion

g-andresen — Mon, 24 Feb 2025 09:41:19 GMT

Hi,

@owrwaytodoit schrieb:

Hi there, I followed your lines but it still doesn't work

Really?

Take a closer look at 0:10

günther

Re: Emboss text in Fusion

jhackney1972 — Mon, 24 Feb 2025 13:12:28 GMT

It could be the Type Font you are trying to use. Some fonts are not recognized by Fusion. Try a simple Extrude on some text in your font, if it extrudes it should work with the Emboss command. Another thing to check, if you are Embossing from the Origin Plane in the center of the cylinder, the Emboss maybe is being created on the backside of the cylinder. Turn the model around and take a look.