topic Re: How to move a solid edge? in Fusion Design, Validate & Document Forum

How to move a solid edge?

tookemtoni — Mon, 24 Feb 2025 05:29:32 GMT

How to move just a solid edge? My intuition is to select that edge and simply try to move it.

See screen shots, video demo and f3d file. https://a360.co/41pbumB

Re: How to move a solid edge?

praise.tomWX9P2 — Mon, 24 Feb 2025 05:38:11 GMT

Hi @tookemtoni
One suggestion is to use a sketch with the required profile and use the extrude option.
Please check on short screen recording click here

Regards

Re: How to move a solid edge?

harv.saund — Mon, 24 Feb 2025 11:34:49 GMT

Hi @tookemtoni

You can use Direct Edit here if you know the angle which you need to move the edge by. The more accurate solution would be to do what @praise.tomWX9P2 suggested and use a sketch and extrude. I have attached a video for the direct edit if you wanted to try.

(view in My Videos)

Thanks,

Harv.

Re: How to move a solid edge?

TrippyLighting — Mon, 24 Feb 2025 12:07:34 GMT

If you do "that", how are you going to address the emerging triangular sliver at the bottom?

Re: How to move a solid edge?

tookemtoni — Tue, 25 Feb 2025 05:40:16 GMT

good point @TrippyLighting But it wont matter for the base on this cabinet. See screenshot

Re: How to move a solid edge?

tookemtoni — Tue, 25 Feb 2025 05:48:51 GMT

I would love to see solid modifications via edges (and points) as fast and easy as we can do with Forms (T-splines) in Fusion. See GIF.

Re: How to move a solid edge?

TheCADWhisperer — Tue, 25 Feb 2025 12:53:54 GMT

@tookemtoni

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

It looks to me like totally incorrect techniques are being used to create the geometry.

Re: How to move a solid edge?

tookemtoni — Wed, 26 Feb 2025 03:46:45 GMT

Here you go.