https://forums.autodesk.com/t5/fusion-design-validate-document/drawing-confusion/m-p/13339153#M4787 <P>I am confused with the dimensions I am getting when in I go the drawing tab. The bottom drawing has the correct dimensions.&nbsp; The top drawing has dimensions that don't match. The only correct dimension in the top drawing is the 184.15.</P> Tue, 25 Feb 2025 17:58:36 GMT tkPRHV6 2025-02-25T17:58:36Z https://forums.autodesk.com/t5/fusion-design-validate-document/drawing-confusion/m-p/13339153#M4787 <P>I am confused with the dimensions I am getting when in I go the drawing tab. The bottom drawing has the correct dimensions.&nbsp; The top drawing has dimensions that don't match. The only correct dimension in the top drawing is the 184.15.</P> Tue, 25 Feb 2025 17:58:36 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/drawing-confusion/m-p/13339153#M4787 tkPRHV6 2025-02-25T17:58:36Z https://forums.autodesk.com/t5/fusion-design-validate-document/drawing-confusion/m-p/13339163#M4788 <P>The bottom dimensions are Aligned to the model and read the length correctly.&nbsp; These dimensions cannot be replicated in the top view due to the fact the model is shown at an angle to the view and do not represent a true length.&nbsp; Fusion will not measure prospective dimensions.</P> Tue, 25 Feb 2025 18:05:27 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/drawing-confusion/m-p/13339163#M4788 jhackney1972 2025-02-25T18:05:27Z