topic Re: Add a curve in Fusion Design, Validate & Document Forum

Add a curve

noob_a1r — Thu, 27 Feb 2025 05:49:50 GMT

Hello

I have created a mold and on the highlighted spot i want to give a little curve.
The bottom part of the mold already has a curve and i want that curve to continue on the highlighted part of the mold

Any idea how i can do it???

Re: Add a curve

johnsonshiue — Thu, 27 Feb 2025 19:41:14 GMT

Hi! I am sorry I don't think I understand what you meant by "curve" in that area. Are you trying to draft the faces (Face Draft) or round the edges (Fillet)?

Many thanks!

Re: Add a curve

TrippyLighting — Thu, 27 Feb 2025 19:51:41 GMT

Can you elaborate what your goals are with this model?

Looking at the mesh in the model and also looking at the timeline of your model raises some concerns!

Re: Add a curve

noob_a1r — Fri, 28 Feb 2025 07:08:52 GMT

concerns are logical if you consider that i am complete amateur user.
The goal is to 3d print that model.
I want to create a pressure mold.
and i want only the highlighted part to have a small fillet

Re: Add a curve

wersy — Fri, 28 Feb 2025 09:17:12 GMT

You mean like this all around?

Or more like this.

Re: Add a curve

noob_a1r — Fri, 28 Feb 2025 09:19:02 GMT

more like the second but on the other side

How you do that??

Re: Add a curve

wersy — Fri, 28 Feb 2025 10:47:47 GMT

For a variable fillet you first need to cut the solid.

Then fillet

You can also use more points to control the fillet the way you want.

Can you show wich part exactly you want to fillet?

Re: Add a curve

noob_a1r — Fri, 28 Feb 2025 11:09:52 GMT

this one

Re: Add a curve

wersy — Fri, 28 Feb 2025 11:27:54 GMT

Re: Add a curve

noob_a1r — Fri, 28 Feb 2025 15:25:49 GMT

You have been very helpful
Thanks a lot!
Also do you know if its possible the highlighted face to give a curve like the photo i attached???