topic Betreff: Curved Angled Cut in Fusion Design, Validate & Document Forum

Curved Angled Cut

flotest — Wed, 05 Mar 2025 12:20:14 GMT

I'm trying to remove the blue angled surface from my 3D model but can't figure out how to do it correctly. I've created a sketch on the surface but can't find the right tool to cut it out as shown in the attached images

Thanks in advance for any help

Betreff: Curved Angled Cut

g-andresen — Wed, 05 Mar 2025 13:12:12 GMT

Hi,

Please share the file for reply.

File > export > save as f3d on local drive > attach to post.

günther

Betreff: Curved Angled Cut

flotest — Wed, 05 Mar 2025 13:46:01 GMT

Hi,

Thanks for your fast reply.

File is attached.

Flo

Betreff: Curved Angled Cut

jhackney1972 — Wed, 05 Mar 2025 15:01:05 GMT

The attached video will explain the process you need.

If my post answered your question, please select the "Accept Solution" icon on my post. If you have further questions please ask.

(view in My Videos)

Betreff: Curved Angled Cut

g-andresen — Wed, 05 Mar 2025 15:06:42 GMT

Hi,

delete double spline > create surface > split body

(view in My Videos)

günther

Re: Curved Angled Cut

flotest — Wed, 05 Mar 2025 15:21:41 GMT

Thank you so much, I tried for 2 hours and couldn't find it and now it's so easy and done in a minute, thank you!

Re: Curved Angled Cut

johnsonshiue — Wed, 05 Mar 2025 18:00:51 GMT

Hi! Without seeing the model, I can only speculate. Another approach to create the desirable geometry is to use Draft command. The "cut" looks like the face being tapered to an angle.

Many thanks!

Betreff: Curved Angled Cut

rqweb75 — Fri, 07 Mar 2025 13:37:23 GMT

Question - You were adamant about using "remove" and not "delete" - can you explain to a newbie why the difference is so significant? Thank you 🙂

Betreff: Curved Angled Cut

TheCADWhisperer — Fri, 07 Mar 2025 13:46:25 GMT

@rqweb75 wrote:
... can you explain to a newbie why

@rqweb75

I think it should be pointed out that everything done was done poorly.

Do you want to learn how to do this all correctly, or is "good enough" good enough for your needs?

Betreff: Curved Angled Cut

jhackney1972 — Mon, 10 Mar 2025 11:01:36 GMT

If you use Delete, you will probably introduce a error into you model since you will be removing graphic information that the remaining model needs. Remove, on the other hand, will retain all graphics information and preserve the integrity of your model. Watch in the Animated GIF where I delete the Split Body and an error appears. I will then UNDO the operation and use Remove and you will not see the error. Even Fusion will try and warn me not to use Delete.