topic Re: Can not cut from a moved component in Fusion Design, Validate & Document Forum

Can not cut from a moved component

natalevo79 — Mon, 27 Feb 2023 08:24:08 GMT

I have moved a component in a model as it is to be customised.

After moving it I wish to use it to cut the panel behind it and fold that panel around it in its new position.

Every time I try to cut from the side of the moved component it asks whether I wish to capture position or revert.

It will not work if I press ''capture'' only if I press ''revert'' but that is no good to me as I need it in the new position to cut from.

What do you think could be causing this?

Re: Can not cut from a moved component

davebYYPCU — Mon, 27 Feb 2023 09:38:00 GMT

Not enough information.

You need Capture position, and then Joint to stop it moving again.

whats in the moved component.

How will you cut the panel, Extrude, Revolve, etc?

Might help....

Re: Can not cut from a moved component

TheCADWhisperer — Mon, 27 Feb 2023 10:20:17 GMT

@natalevo79

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Re: Can not cut from a moved component

natalevo79 — Tue, 28 Feb 2023 04:40:45 GMT

For the past 6-7 years I have always been able to move a steel post or copy or create new component without it having to revert to its original position. If I do joint it I then cant move it back. suppressing the joint only makes it revert back.

I will have to do this very mechanically by creating planes etc but I still have no idea what is causing this strange problem.

Re: Can not cut from a moved component

TheCADWhisperer — Tue, 28 Feb 2023 07:08:16 GMT

@natalevo79 wrote:
…but I still have no idea what is causing this strange problem.

@natalevo79

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

If the data is proprietary then simply make up a dummy file that exhibits the same behavior.

Re: Can not cut from a moved component

natalevo79 — Wed, 01 Mar 2023 18:38:38 GMT

I cant upload the file due to its proprietary nature.
It appears as though something is going wrong back in the beginning of the parametric drawing which is locking it into a position. But can not find the problem and of course under time constraints we will probably have to send this to the floor to be mechanically drilled instead of by the laser. I will re evaluate when I have the time. Thank you for your time though I appreciate it.

Re: Can not cut from a moved component

davebYYPCU — Wed, 01 Mar 2023 21:32:31 GMT

Are the sketches Locked? Do you have green sketch articles?

Most SVG imports have green locked sketch articles, you can unlock them, turns blue, in my colour scheme.

Might help....