topic Re: 3D CAD EXERCISE 1113 in Fusion Design, Validate & Document Forum

3D CAD EXERCISE 1113

scherer_jahren_0k — Sat, 05 Aug 2023 15:22:15 GMT

Hi, I was wondering how to model a vase like this. I have tried several times and searched on youtube but have not found a solution. I have no idea how to add the ridges on the sides of the vase.

Thanks in advance.

https://studycadcam.blogspot.com/2021/07/3d-cad-exercises-1113.html

Re: 3D CAD EXERCISE 1113

g-andresen — Sat, 05 Aug 2023 14:56:55 GMT

Hi,

please share the basic shape

File > export > save as f3d on local drive > attach to post

günther

Re: 3D CAD EXERCISE 1113

scherer_jahren_0k — Sat, 05 Aug 2023 15:23:25 GMT

I have added the basic shape, I hope it is what you wanted.

Re: 3D CAD EXERCISE 1113

g-andresen — Sat, 05 Aug 2023 16:46:28 GMT

Hi,

here´s one way

(view in My Videos)

günther

Re: 3D CAD EXERCISE 1113

scherer_jahren_0k — Sat, 05 Aug 2023 16:58:22 GMT

Thanks for your quick help but i want to create this shape. The technical drawing is here https://studycadcam.blogspot.com/2021/07/3d-cad-exercises-1113.html

Re: 3D CAD EXERCISE 1113

g-andresen — Sat, 05 Aug 2023 17:25:51 GMT

Hi,

I have shown you the principle.
The realisation with the given dimensions you have to do yourself.

Günther

Re: 3D CAD EXERCISE 1113

scherer_jahren_0k — Sat, 05 Aug 2023 19:08:27 GMT

yes i got that, but have you opened the file i provided in my response or in this post? i think your principle does not work, because it needs to kind of wrap around the vase and cannot just be extruded in one direction. nevertheless thank you for the answers

Re: 3D CAD EXERCISE 1113

jhackney1972 — Sat, 05 Aug 2023 19:33:38 GMT

Please provide a native Fusion 360 model, not a STEP file.

Since you are new to the Forum, I want to bring something to your attention. When responding to a post from someone, do not use the "Post Reply" icon as this will address your post to yourself. Instead use the "Reply" icon on the post you are responding to address your post to that person. Look back at the messages in this post and you will see what I mean.

Re: 3D CAD EXERCISE 1113

TheCADWhisperer — Sat, 05 Aug 2023 21:21:50 GMT

@scherer_jahren_0k

See Attached.

I think you can figure out the inside, and bottom Revolve Cuts.

Then add the Fillets.