topic Re: Help needed - Lego Spike Motor Design in Fusion Design, Validate & Document Forum

Help needed - Lego Spike Motor Design

abdelhalimwahid — Mon, 28 Aug 2023 08:32:15 GMT

I want to design a part like lego compatible part, so I need to design that 2 holes with space between them which is kinda shows that outer cylinder of the hole on the other side.

Re: Help needed - Lego Spike Motor Design

TheCADWhisperer — Mon, 28 Aug 2023 10:03:52 GMT

@abdelhalimwahid

Can you File>Export your *.f3d file of your attempt to your local drive and then Attach it here to a Reply?

Re: Help needed - Lego Spike Motor Design

etfrench — Mon, 28 Aug 2023 18:27:44 GMT

Here's one way to make the pegs which can also be used to cut the holes:

(view in My Videos)

Re: Help needed - Lego Spike Motor Design

abdelhalimwahid — Fri, 01 Sep 2023 06:45:03 GMT

Here you are,

Re: Help needed - Lego Spike Motor Design

abdelhalimwahid — Fri, 01 Sep 2023 06:46:32 GMT

how can I cut with revolve tool?

Re: Help needed - Lego Spike Motor Design

davebYYPCU — Fri, 01 Sep 2023 06:57:50 GMT

Its in the pull down menu.

Might help....

Re: Help needed - Lego Spike Motor Design

abdelhalimwahid — Fri, 01 Sep 2023 07:18:18 GMT

but it still not doing the shell for the hole

I need to make a shell for the hole on the top face( the one between the two holes)

Re: Help needed - Lego Spike Motor Design

davebYYPCU — Fri, 01 Sep 2023 08:59:53 GMT

How does Revolve Cut and Shell, have anything to do with

Extrude a tube?

Re: Help needed - Lego Spike Motor Design

TheCADWhisperer — Fri, 01 Sep 2023 11:51:19 GMT

@abdelhalimwahid

Are all of your sketches fully defined?

Do you see any blue lines or white dots in Sketch9?

Re: Help needed - Lego Spike Motor Design

abdelhalimwahid — Sat, 02 Sep 2023 15:33:39 GMT

All the Lines are blue