Create dome-shaped dimples on multiple component bodies

munchkinnick — Wed, 06 May 2026 23:46:00 GMT

I have these small expansion washers that i'm going to 3D print which all have slightly different chamfer settings on the top inner ring. To more easilly tell them apart, I want to add small dome-shaped dimples to the underside; 1 on the first, 2 on the second, etc.

What is the easiest way to do this?

I can sketch the circle and profile of the dome on one component, revolve-cut the dome, and then circular array the feature to copy it multiple times for each component, but i'm hoping I can just define the sketches (circle and revolve profile) once and then somehow use it for all four components.. But I don't know how.

Thanks in advance!

PS. My file is a hybrid design

PPS. Is it possible to define a feature like this revolve cut, and then copy it anywhere you want to apply it? e.g. copy it and move it to another face, positioning the centre of the circle to something?

Re: Create dome-shaped dimples on multiple component bodies

TheCADWhisperer — Thu, 07 May 2026 00:08:05 GMT

@munchkinnick

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

topic Re: Create dome-shaped dimples on multiple component bodies in Fusion Design, Validate & Document Forum

Create dome-shaped dimples on multiple component bodies

Re: Create dome-shaped dimples on multiple component bodies