topic Re: Rc car Trailer in Fusion Design, Validate & Document Forum

Rc car Trailer

Winston_ruesch — Fri, 06 Mar 2026 17:25:58 GMT

Hi I am wondering if there is anybody out there that could help me design a rc car trailer that I could 3d print and use to connect to my RC car my Rc car is Fast send Rc car if you need me to upload a picture I can. I would also need help so that I can connect it to the car because the car does not have a trailer connector.

Thanks

Re: Rc car Trailer

dsouzasujay — Sun, 22 Mar 2026 07:23:04 GMT

Hi @Winston_ruesch ,

That sounds like a fun project.

Just to set expectations, the forum is mainly here to help you learn how to use Fusion and guide you through the design process, rather than designing the full model for you. That said, we are definitely happy to help you get started and support you along the way.

First i would suggest starting with "Self-Phased learning"

Later, Here is how we can help:

Guide you step by step on how to design the trailer in Fusion
Help you figure out a simple hitch/connector mechanism for your RC car
Suggest design ideas that are 3D printable and strong enough
Review your design and suggest improvements

To get started, it would really help if you could share:

A photo of your RC car, especially the rear side
Approximate dimensions (width, ground clearance, mounting points if any)
Any idea of the type of trailer you want (flatbed, enclosed, etc.)

Once you share that, we can help you build the design step by step

Re: Rc car Trailer

Winston_ruesch — Mon, 23 Mar 2026 12:29:06 GMT

I am gonna be doing a flatbed trailer. Here is a picture of the back of
the RC car I hope we can get started on this soon and thanks for your
comment. Thanks Winston
[image: Screenshot 2026-03-23 7.26.54 AM.png]

Re: Rc car Trailer

dsouzasujay — Tue, 24 Mar 2026 15:52:19 GMT

Hi @Winston_ruesch ,

I can't see any image attached, could you please attach again?

Re: Rc car Trailer

Winston_ruesch — Tue, 24 Mar 2026 16:01:01 GMT

sure

Re: Rc car Trailer

Winston_ruesch — Tue, 24 Mar 2026 16:07:09 GMT

Re: Rc car Trailer

dsouzasujay — Tue, 24 Mar 2026 16:27:00 GMT

@Winston_ruesch ,

it's not easy to create from one image without dimensions and measurements.
We need all the dimensions to start with.

if you want to start with a rough sketch, then follow below instructions in the video
Design from an Image Canvas - YouTube

Re: Rc car Trailer

navya_gelli — Mon, 30 Mar 2026 10:02:36 GMT

Hi @Winston_ruesch,

I wanted to check in and see if you still needed assistance, or if you found a solution to your question already? Let us know if you need further assistance by providing an update or if you have found a solution, please share it with the community so other members who may have the same question could learn from your experience.

All the best,

Navya | Community Manager

Re: Rc car Trailer

Winston_ruesch — Mon, 30 Mar 2026 12:40:28 GMT

no i need assistance i am kinda dumb and i suck at building stuff

Re: Rc car Trailer

dsouzasujay — Mon, 30 Mar 2026 15:15:48 GMT

Hi @Winston_ruesch ,

Please start with basics and start Learning concepts Like creating Sketch & creating simple designs.

There are a lot of YouTube videos that will walk through step by step.