topic Betreff: Offset extrusion of existing pipe component in Fusion Design, Validate & Document Forum

Offset extrusion of existing pipe component

mrdawborn — Sun, 04 Jan 2026 10:21:33 GMT

Hello,

I want to create a type of cover that snap fits over this existing pipe loop component. I have created the offset but not sure how I can make it semi-extruded as opposed to being a solid pipe (using the create -> pipe feature).

I've attached an example of what I want to do but would prefer the 'slit' (opening to be bigger = customizable).

How would I go about doing this? I'm thinking revolve but then I would need to create a sketch of the cross section. Is there any easier solution?

Betreff: Offset extrusion of existing pipe component

g-andresen — Sun, 04 Jan 2026 11:02:53 GMT

Hi,

please share the f3d file for reply

günther

Betreff: Offset extrusion of existing pipe component

mrdawborn — Sun, 04 Jan 2026 11:16:27 GMT

Thanks for the reply. Attached.

edit: Project is a bit of a mess while I experiment with solutions. Sorry

Betreff: Offset extrusion of existing pipe component

g-andresen — Sun, 04 Jan 2026 13:20:29 GMT

Hi,

1. cleaned sketch 1

2. create pipe

3. sketch cover profile

4. sweep cover profile

(view in My Videos)

günther

Betreff: Offset extrusion of existing pipe component

mrdawborn — Sun, 04 Jan 2026 13:29:53 GMT

That's awesome, thank you. Yeah, sketching the cross section and then sweeping around the pipe path is exactly what I should have done.

Thanks again.