topic Re: workflow multi position for Folding project in Fusion Design, Validate & Document Forum

workflow multi position for Folding project

Francois_Moreau — Mon, 24 Nov 2025 15:24:34 GMT

Hi,

I search a workflow for make some folding with Vbit CNC

what I easiest find is here

Make extrude on a master

assemble it flat, make some changement, extrude it again with the angle off the bit

and make one more Move to find back the 3D

like it is possible with Config, but need a lot of step, do I miss something to find an easiet way?

https://a360.co/44opNZB

Re: workflow multi position for Folding project

kacper.suchomski — Mon, 24 Nov 2025 16:47:40 GMT

(view in My Videos)

Finally, you can define constraints and configure operations (or constraints) to define positions.

Re: workflow multi position for Folding project

Francois_Moreau — Mon, 24 Nov 2025 17:39:03 GMT

thanks @kacper.suchomski

I will try also like that, but my question still to be, how to switch in the 2 positions of the "origami", like I do first the ruf 3D shape, then I open it, add somme small stuff (in the way you do) then back to 3D shape, back to flat position, I still search for the most practical way,and the idea of filet will help me, thanks

Re: workflow multi position for Folding project

gautham_kattethota — Mon, 24 Nov 2025 18:46:30 GMT

@Francois_Moreau you could configure Position Capture feature or Joints/Constraints that you use for rotation so that you can capture the flat and the folded orientations using Configurations.

Gautham

Re: workflow multi position for Folding project

kacper.suchomski — Mon, 24 Nov 2025 20:04:01 GMT

Maybe this:

(view in My Videos)

Re: workflow multi position for Folding project

Francois_Moreau — Tue, 25 Nov 2025 07:49:47 GMT

yes

I was thinking I must wait that config with position stronger dev would be

config 1

Config 2

and Config 1 when I put the position at the End

all wright

config do not resolve this stuff with time line, so you must re-do your Move / position back every new change

I will try a video