https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916811#M323629 <P>yes, but should they</P> Mon, 24 Nov 2025 00:18:10 GMT soliloqueenwastaken 2025-11-24T00:18:10Z https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916798#M323627 <P>Right now, if you have a countersunk or counterbored hole, and you pull the face upwards, it extends the counterbore or counterface upwards. This is expected behavior and is, for my application, correct. However, it does NOT update the automatically generated counterbore depths or countersink diameters in the 2D drawing, which it probably should</P> Mon, 24 Nov 2025 00:03:28 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916798#M323627 soliloqueenwastaken 2025-11-24T00:03:28Z https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916802#M323628 <P>Hi</P> <P>Automatic dimensions read parameter values, not geometric distances.</P> Mon, 24 Nov 2025 00:09:07 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916802#M323628 kacper.suchomski 2025-11-24T00:09:07Z https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916811#M323629 <P>yes, but should they</P> Mon, 24 Nov 2025 00:18:10 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916811#M323629 soliloqueenwastaken 2025-11-24T00:18:10Z https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916816#M323630 <P>This is how they work and you should adapt your workflow to it.</P> Mon, 24 Nov 2025 00:25:52 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916816#M323630 kacper.suchomski 2025-11-24T00:25:52Z https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916819#M323631 <P>I regularly need to change the amount of extra stock on each side of a part depending on the specific machine a contract lapper is using and it's annoying to go through and change all of them manually. Is it reasonable for the software to automatically generate factually incorrect drawings? I understand that the easiest way to program the software is to read the parameters, but I would appreciate some extra effort here.</P> Mon, 24 Nov 2025 00:35:21 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916819#M323631 soliloqueenwastaken 2025-11-24T00:35:21Z https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916827#M323632 <P>Automatic dimensions are a nice addition to standard design scenarios.</P> Mon, 24 Nov 2025 00:37:56 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916827#M323632 kacper.suchomski 2025-11-24T00:37:56Z https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916828#M323633 <P>don't disagree with you, I just don't think it's reasonable to the end user that they should soft fail to incorrect dimensions with no warning, no disclaimer and no way to tell at a glance if they're wrong. it makes hunting through multi page drawings to solve all these little errors a bit of a chore.</P> Mon, 24 Nov 2025 00:41:12 GMT https://forums.autodesk.com/t5/fusion-design-validate-document/accurate-countersinks-and-counterbores-after-press-pull/m-p/13916828#M323633 soliloqueenwastaken 2025-11-24T00:41:12Z