topic Re: McMaster component comes as multipule bodies in Fusion Design, Validate & Document Forum

McMaster component comes as multipule bodies

frostedtitan17 — Fri, 03 Oct 2025 05:46:56 GMT

I'm trying to make a custom adapter that has a 1/16" NTPF thread on one side, and with no tool to model external npt threads I figured I'd import a part from McMaster then cut and join it. But this single part imports with multiple bodies that wont join together.

Re: McMaster component comes as multipule bodies

TheCADWhisperer — Fri, 03 Oct 2025 05:39:25 GMT

@frostedtitan17

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Did you run a quality check on the imported geometry?

Re: McMaster component comes as multipule bodies

frostedtitan17 — Fri, 03 Oct 2025 05:48:41 GMT

I know it's sloppy but I was just trying a couple things and just got stumped but the .f3d is now added.

Re: McMaster component comes as multipule bodies

frostedtitan17 — Fri, 03 Oct 2025 05:59:03 GMT

Discovered the solution, I moved the extra bodies then used the align tool and they joined no problem after that.

Re: McMaster component comes as multipule bodies

TheCADWhisperer — Fri, 03 Oct 2025 06:23:26 GMT

@frostedtitan17

Can you work with the Attached geometry?

There are some gaps you might want to remove...