topic Re: rendering problem after combine->intersect in Fusion Design, Validate & Document Forum

rendering problem after combine->intersect

miaoke6P3L2 — Fri, 29 Aug 2025 00:53:33 GMT

Could someone help me to fix these problem please. After I did intersect and render, the colour looks like this. what should I do to get a solid colour?

Thank you, Sabrina

Re: rendering problem after combine->intersect

Drewpan — Fri, 29 Aug 2025 02:53:08 GMT

Hi,

It looks like what you have is two bodies intersecting and being displayed at the

same time. There are two bodies but they are both turned visible and fusion will

render this as best it can.

It is difficult to know what it is you are trying to achieve, but if what you want is

the cylinder to cut out a piece of the sphere and become a replacement core then

there are several different ways. One is like this, you need to first use the core

body to do a Combine Cut.

Run the command and your Target is the Sphere and your Tool is the core.

Make sure you Keep the Tools.

What this does is cut a hole in the sphere with the core as a Tool.

And since you Kept the Tool you still have the core.

And you get what you wanted.

It seems that you are new to the Forum so I would strongly suggest looking

at RULE #0 to learn Fusion better. Thanks for the question, images are good

but next time also attach your file so we can see what you have done.

Cheers

Andrew

Re: rendering problem after combine->intersect

TheCADWhisperer — Fri, 29 Aug 2025 03:34:34 GMT

@miaoke6P3L2

What is your goal? Your Design Intent?

I suspect Split Face is what you really want to use.

Can you File>Export your *.f3d file to your local drive and then Attach it here to a Reply?

Re: rendering problem after combine->intersect

miaoke6P3L2 — Fri, 29 Aug 2025 05:59:57 GMT

Hi.

Yes, that's what I want, thank you very much.

Yes, I have just started Fusion. I will attach a file next time.

Thanks again

Re: rendering problem after combine->intersect

miaoke6P3L2 — Fri, 29 Aug 2025 06:01:17 GMT

Hi, thank you for your reply, it's solved. I will attach a file next time.

sorry I'm very new to Fusion