topic Re: Can only display Safety Factor results in Simulation in Fusion Design, Validate & Document Forum

Can only display Safety Factor results in Simulation

Noah_Katz — Mon, 11 Aug 2025 04:02:49 GMT

I ran a static loads simulation and the only result I can display is safety factor.

I checked the simulation I ran several months ago and it's the same with that.

It used to be that if I clicked on Safety Factor above the colored results bar I would have options to change it to Stress or Displacement (with further options for their components) but now nothing happens.

What's going on?

Re: Can only display Safety Factor results in Simulation

kacper.suchomski — Mon, 11 Aug 2025 10:10:46 GMT

This can be changed in the simulation browser.

To display the browser, click the Results button in the Study panel on the Results tab.

Re: Can only display Safety Factor results in Simulation

Noah_Katz — Mon, 11 Aug 2025 16:24:07 GMT

Oh, now I see it, way over on the left; thanks.

Not sure why they needed to complicate it like that.