topic Re: copy/paste individual faces from a T-Spline body in Fusion Design, Validate & Document Forum

copy/paste individual faces from a T-Spline body

paysagine — Mon, 15 Sep 2014 17:59:08 GMT

Hello,

I can't copy/paste individual faces from a T-Spline body. (like this tuto : https://www.youtube.com/watch?v=ixpb0hIgKGw )

The surface create (i select the 4 front face) not match perfectly and the surface is different (you can see the result on picture).

Please can you help me to solve this problem.

Thanks

Alexandre

Re: copy/paste individual faces from a T-Spline body

innovatenate — Thu, 18 Sep 2014 23:49:38 GMT

I suspect that you may need to select more faces to copy and paste to maintain the same geometry. You could try subdividing (command in the Modify menu) the existing faces before copying and pasting the sculpt surface.

I hope that helps. Please let me know if you have any questions.

Re: copy/paste individual faces from a T-Spline body

paysagine — Fri, 19 Sep 2014 22:21:23 GMT

subdivise command work well
Thanks a lot.