topic Re: Joint - Make it Move in Fusion Design, Validate & Document Forum

Joint - Make it Move

Anonymous — Tue, 23 Sep 2014 23:15:56 GMT

I've created a simple revolute joint and it animates as it should. But, I can't "click and drag" to make it move as the tutorial video's state.

What's the secret????

thanks,

Re: Joint - Make it Move

Anonymous — Wed, 24 Sep 2014 19:43:54 GMT

I'm having the same problem

Re: Joint - Make it Move

joel.palioca — Wed, 24 Sep 2014 21:06:23 GMT

Hello,

Apologies for the inconvience, to get things working correctly for this tutorial what you can do is disable contact sets prior to the move. See the image below on how to turn off contact sets.

We have plans to get this fix in one of the upcoming updates to resolve any further issues.

Cheers,

Re: Joint - Make it Move

Anonymous — Wed, 24 Sep 2014 21:45:40 GMT

Unfortunately, I don't have any contact sets. I was having no luck with a design I had already started so I thought I'd take a step back.

I started a new design. I created a disk and then a small rectangle.

I created a revolute joint so that the rectangle revolved around the center of the disk.

That simple - and it doesn't work.

I've attached my test file.

?? David

Re: Joint - Make it Move

joel.palioca — Wed, 24 Sep 2014 21:53:53 GMT

Hi David,

I am not sure how this happened, but somehow your component drag got turned off.

Enabling this option allows you to drag the component. If you ground the disk and then click and drag the rectangle you can get it to operate like I think you want it to.

Cheers,

Re: Joint - Make it Move

Anonymous — Wed, 24 Sep 2014 22:20:18 GMT

FINALLY ! It worked.

How would I have known that without posting for help? Is there any documentation?

Thanks, David

Re: Joint - Make it Move

dcgall — Wed, 24 Sep 2014 23:32:27 GMT

Joel, whatever happened to AS IS Joints (I think that's what it was called).

I remember seeing a video that referred to this. If you had components that were already properly placed,

you could joint in it's current position.

How can that be accomplished now? thanks, David

Re: Joint - Make it Move

joel.palioca — Thu, 25 Sep 2014 17:05:12 GMT

Hi David,

You should be able to find this command under the assemble tab.

Something you can also do when looking for commands or additional information on how to use them is leverage our search for help from the help menu.

What this will do is open up our learning content in a browser and start the search for you for the information you entered into the field.

Hope this helps,

Re: Joint - Make it Move

dcgall — Thu, 25 Sep 2014 18:51:59 GMT

Joel, apparently I'm running an older version (I thought it automatically updated).

I do not have this optiion. My build is 2.0.1285. How can I update? I can't find any option for this. thanks, David

Re: Joint - Make it Move

joel.palioca — Thu, 25 Sep 2014 18:57:27 GMT

Hi David,

It looks like you are in Direct modeling or a base feature. The option for an As-Built joint is something specific to parametric modeling.

Right now the only way to gain access to this feature is through a parametric model.

Cheers,