topic Re: Why does Fillet only work on some offset lines? in Fusion Design, Validate & Document Forum

Why does Fillet only work on some offset lines?

Anonymous — Sun, 14 Dec 2014 20:14:48 GMT

Hi,

I have a sketch on the face of a geometry. This sketch projects the outer lines of this geometry and then I used the offset to inset these lines a little bit. I also added some circles that intersect these lines. Then I deleted all lines and circle parts with Trim so that the lines form one line again. Now I want to use the Fillet operation on the produced edges. On one side that is no problem, on the other side it is. All this can be seen in this video:

Why can't I fillet on both sides?

Greetings

Stefan

Re: Why does Fillet only work on some offset lines?

innovatenate — Mon, 15 Dec 2014 05:27:37 GMT

Welcome to the Fusion 360 forum!

Would you mind posting a public link of the file to this thread? The below link shows how to create a public link of the design.

http://knowledge.autodesk.com/support/fusion-360/getting-started/caas/screencast/Main/Details/2b205403-2b70-4121-be9c-5ef9aa6b9134.html

Thanks

Re: Why does Fillet only work on some offset lines?

Anonymous — Mon, 15 Dec 2014 09:17:00 GMT

Hi,

this is the link:

http://a360.co/1yT2Xpg

Greetings

Stefan Rakel

Re: Why does Fillet only work on some offset lines?

karyeka — Mon, 15 Dec 2014 15:12:47 GMT

Hi Stefan,

Thanks for reporting and providing the model. Yes, not all offset curves are selectable for fillet. We will look at this.

Thanks,

Anand

Fusion360 Development