https://forums.autodesk.com/t5/fusion-design-validate-document/making-boxes/m-p/5481340#M305587 <P>I just did what I'm talking about via a rather manual process. I used the inner faces of the box to "Split Body" until the corners where separate from each face. Then I made horizontal construction planes at 25%, 50%, and 75% down the box and cut the corner into fourths. Then I joined the newly cut corner pieces (tabs) with the body faces. It worked, but I'm wondering if there's a better way.</P><P>My next effort might be to cut the entire box with the horizontal construction planes and <EM>then</EM> do the edge cuts only to the pieces that apply, but then I have to combine the pieces of the faces, so I think that's just as much work.</P> Sat, 24 Jan 2015 21:20:24 GMT codefoster 2015-01-24T21:20:24Z