https://forums.autodesk.com/t5/fusion-design-validate-document/insert-edge-unexpected-behavior/m-p/5490126#M304817 <P><SPAN>I expected that the adjacent edges would maintain their&nbsp;consistent&nbsp;spacing and the new edge would result in the two adjacent edges being the same length (thought that is what the .5 meant).</SPAN></P><P>&nbsp;</P><P><SPAN>The preview looks pretty much like I expect, but applying the new edge seems to cause a shift adding asymmetry and resulting in unequal edge measurements.</SPAN></P><P>&nbsp;</P><P><SPAN>See screencast Video:</SPAN></P><P><SPAN><A target="_blank" href="https://screencast.autodesk.com/Main/Details/b0127ef0-4b42-43f4-85ca-4c1d3105e038">https://screencast.autodesk.com/Main/Details/b0127ef0-4b42-43f4-85ca-4c1d3105e038</A></SPAN></P><P>&nbsp;</P><P><SPAN>Best,</SPAN></P><P><SPAN>Brian</SPAN></P> Fri, 30 Jan 2015 22:41:35 GMT bverboort 2015-01-30T22:41:35Z