topic Re: How to Edit Sketch in Fusion Design, Validate & Document Forum

topic Re: How to Edit Sketch in Fusion Design, Validate & Document Forum https://forums.autodesk.com/t5/fusion-design-validate-document/how-to-edit-sketch/m-p/5491299#M304699 Is it possible you've created more than one sketch?  If you've created a second sketch overtop of the first sketch then it will reference the other sketch but it won't allow you to add new dimensions to drive the geometry of that sketch.  Is that it?  Pic examples below.   If not, snap a screen shot of your screen and let's take a look.   Best, Mike       <IMG src="https://forums.autodesk.com/t5/image/serverpage/image-id/151913iB16364FA826B25F7/image-size/original?v=mpbl-1&px=-1" border="0" alt="original geometry.jpg" title="original geometry.jpg" />] <IMG src="https://forums.autodesk.com/t5/image/serverpage/image-id/151914iD0466F9171CA1155/image-size/original?v=mpbl-1&px=-1" border="0" alt="double sketch overlay.jpg" title="double sketch overlay.jpg" />       For additional learning here's a pretty good video Patrick did with sketching.  It doesn't feature the newly added side panel for contraints but  the sketch and contraining behavior is the same. Sketching part 1 <A href="http://youtu.be/OtkmiPeUxqE" target="_blank">http://youtu.be/OtkmiPeUxqE</A>   Sketching part 2: <A href="http://youtu.be/3EGWWT65Vrs" target="_blank">http://youtu.be/3EGWWT65Vrs</A>   Mon, 02 Feb 2015 06:34:31 GMT MichaelAubry 2015-02-02T06:34:31Z