topic Re: How to Edit Sketch in Fusion Design, Validate & Document Forum

topic Re: How to Edit Sketch in Fusion Design, Validate & Document Forum https://forums.autodesk.com/t5/fusion-design-validate-document/how-to-edit-sketch/m-p/5491273#M304697 Hey Garnet,   Welcome to Fusion 360!  My guess is the visiblity of the sketch you created is turned off. Look to the left in the brouser and look for the sketches folder.  Make sure both the sketches light bulb and the sketch contained within the folder are both turned on (yellow is on and white is off). Let us know if that fixes it. <IMG src="https://forums.autodesk.com/t5/image/serverpage/image-id/151910i27D61AFBD23683A8/image-size/original?v=mpbl-1&px=-1" border="0" alt="sketch visiblity ideas.jpg" title="sketch visiblity ideas.jpg" />     Also if you don't see a timeline in the bottom then you are in direct modelign mode and not parametric mode.  We support both.  In direct mode the sketch won't be parametrically linked to the extrusion you created.  This can be a very freeing thing, but if you're looking for a SWX style experience I'd model in parametric mode.  If it's turned off, you can turn it back on by right clicking on the top level assembly and selecting capture design history.   <IMG src="https://forums.autodesk.com/t5/image/serverpage/image-id/151911iF861BD92B46D9F1D/image-size/original?v=mpbl-1&px=-1" border="0" alt="capture design history.jpg" title="capture design history.jpg" />   Let us know if that helps.   Best! Mike Michael Aubry Fusion 360 Evangelist Mon, 02 Feb 2015 05:53:04 GMT MichaelAubry 2015-02-02T05:53:04Z