topic Re: Unable to set design rules in Fusion 360 2.0.17710 x86_64 in Fusion Design, Validate & Document Forum

Unable to set design rules in Fusion 360 2.0.17710 x86_64

chandra_ahirwar — Wed, 01 Nov 2023 14:39:21 GMT

Hi,

After updated Fusion360 (2.0.17710) - Design rule is not set, Kindly check & Guide.

Regards,

Chandra A.

Re: Unable to set design rules in Fusion 360 2.0.17710 x86_64

jhackney1972 — Wed, 01 Nov 2023 15:25:25 GMT

Please explain further what you are asking for, your statement is not descriptive enough.

Re: Unable to set design rules in Fusion 360 2.0.17710 x86_64

chandra_ahirwar — Thu, 02 Nov 2023 06:22:48 GMT

We have Set Net Classes -design rule in Schematic design, validate ERC & Synchronized, so design rule is updated in PCB Layout file. But Some time that Net Classes -design rule is not updated in PCB Layout. I updated Net Class design Rule directly in PCB File & save the project. But when we again re-open project file there Net Class rule is empty.

Please go thru attached files.