topic arc/fillet problem in Fusion Design, Validate & Document Forum

arc/fillet problem

Anonymous — Sat, 15 Aug 2015 04:36:31 GMT

Fillet works on lines but not arcs.

See screencast

https://screencast.autodesk.com/main/details/5ee54452-4fbc-4496-81e4-e12b414fcb29

Note pop-up box which says "fillet cannot be created"

Re: arc/fillet problem

jiang_peng — Sat, 15 Aug 2015 10:40:11 GMT

I think it's a bug. We will log it and start to investigate.

As a workaround, please see following steps:

Now the fillet:

Re: arc/fillet problem

jiang_peng — Sun, 16 Aug 2015 10:11:08 GMT

Bug logged as FUS-19601

thanks

Re: arc/fillet problem

Anonymous — Sun, 27 Dec 2015 15:01:16 GMT

This still seems to be a problem.

I don't appear to be able to creat a fillet from an arc that has any kind of constrants.

If i make 2 arcs in the middle of no where connected to nothing else I can can use the fillet comand on them no problem but as soon as I draw an arc conected to other elements the fillet comand stops working even if it's between an arc and a straight line.

Re: arc/fillet problem

jiang_peng — Mon, 04 Jan 2016 09:51:37 GMT

Could you please post a screenshot of the new found issue?

Thanks!

Re: arc/fillet problem

Anonymous — Tue, 05 Jan 2016 23:07:31 GMT

Good morning Jiang Peng from New Zealand.

There is a screen shot already posted with respect this problem.

If you need to repeat the problem, just draw two arcs. Then try to put a
fillet across the ends of them. For example an upper and lower airfoil arc
cross-section with a radius leading and trailing edge.

Good luck

Stuart Reid B E (Mech) N Z C E (Mech)

Managing Director

_____

027 240 9691

04 586 3411

stuart.reid@spitfire.net.nz

www.spitfire.net.nz

421 Cuba Street
Alicetown
Lower Hutt 5010